Bass50 Setup Guide
Dual Tops + Dual Monitors
Get up and running quickly by following the instructions below.
Bass50 Setup Guide:
Dual Tops + Dual Monitors
Get up and running quickly by following the instructions below.
Note:
Handles and QD Connectors
The Bass50 and Universal Port feature QD Bolts which allow you to quickly attach/detach the handles. We recommend leaving the handles attached during setup to easily lift and move your components.
Step 01:
Prep the Bass50s
Remove the 4 grille-side feet from the Bass50s.
Replace the hex bolts, leaving the side bolts slightly unscrewed.
Step 02:
Attach Latches to Bass50s
Slide the latches over the loosened side bolts, then tighten the bolts to hold the latches firmly in place.
Step 03:
Place Bass50s On Dollies
Place the Bass50s on the dollies, grille-side up:
- Hook the battery-side feet under the cleats.
- Lower the control-side feet down into thelatches so they lock firmly in-place.
NOTE: make sure the wheels are locked to
prevent the dollies from moving during setup.
We recommend facing the control panel away
from the crowd for ease of access to wiring and
controls and a cleaner look.
Step 04:
Attach Universal Ports
Place the Universal Ports on top of the Bass50s,
with the large opening facing down and the
port opening facing in the same direction
as the Bass50’s battery cover. Make sure to
align the spacers on the port with 4 hex bolts
on the top of the Bass50.
Next, rotate the side latches up and twist the knob to secure the Universal Ports to the Bass50s.
Step 05:
Set Up Top Speakers + Monitors
Place your top speakers and monitors in the area.
System Diagrams
View and download our recommended connection guides.
Wired
SKAA Hybrid
For more information on SKAA wireless technology, view our SKAA Wireless Guide or see the Bass50 User Manual.
The Trulli App
Download the Trulli App to explore DSPs and fine tune your Bass50's sound settings.
Scan the Code to Download:
Download The Trulli AppLearn More About DSPs
