Note:

Handles and QD Connectors

The Bass50 and Universal Port feature QD Bolts which allow you to quickly attach/detach the handles. We recommend leaving the handles attached during setup to easily lift and move your components.

Step 01:

Prep the Bass50

Remove the 4 non-grille-side feet from the Bass50 and set the bolts aside for now, you will use these to attach the M20 Plate in Step 03.

Step 02:

Place Bass50 On Dolly

Place the Bass50 on the dolly, grille-side down:

• Hook the battery-side feet under the cleats.
• Lower the control-side feet down into thelatches so they lock firmly in-place.

NOTE: make sure the wheels are locked to prevent the dolly from moving during setup.

We recommend facing the control panel away from the crowd for ease of access to wiring and controls and a cleaner look.

Step 03:

Attach M20 Plate

Place the M20 Plate on the Bass50, making sure to align the bolt holes.

Use the bolts you set aside in Step 01 to secure the plate to the Bass50 and reattach the side bolts as well.

Step 04:

Attach Speaker Pole

Screw the threaded end of the Trulli Speaker Pole into the top of the M20 Plate. Make sure the pole is screwed in all the way and that there is no gap between the bottom of the pole and the top of the plate.

NOTE: you can hang sandbags off the sides of the M20 Plate to add additional weight.

Step 05:

Attach Top Speaker

Place your top speaker on the Speaker Pole, then rotate the tightening ring to secure it in place.